شركة زلاف ليبيا لاستكشاف وانتاج النفط والغاز – دعوة لتأهيل مسبق لخدمات الحفر في حقل ان سي 200

Operator Zallaf Libya Exploration and Production Oil & Gas Company, hereinafter referred to as (“Zallaf”),intends to issue a Call for Tender for the provision of the services of one 1,500 HP drilling rig to drill & complete WSW, WIW and development oil wells, whose locations are mentioned below.

 

Location: OnshoreNC200 block located in Libyan Murzuq Basin, about 800 km southwest of Tripoli.

 

1-Project Main Objectives

 

Zallaf,Operator of NC200 block in Murzuq basin is scouting and pre-qualifying Libyan and international market to support its continuing Drilling, Completion & Workover Programs.

 

Zallaf is seeking one 1,500 HP drilling rig with fast moving system.

 

Rig component specifications will be described in the detailed Invitation to Tender. Drilling & Completion programs would target WSW, WIW and development vertical / deviated & horizontal oil wells. At present, the anticipated operations start date is Q1 2019. Initial contract duration would be related to 2019 – 2020 drilling and completion plan.

                                                          

All Drilling & Workover Contractors dully registered in Libya are invited to participate in this prequalification process by submitting photographs and specifications of their available drilling and workover rigs, their current locations for potential Zallaf inspection, and the additional informationrequested hereinafter no later than fifteen days (15) from the date of this publication.Upon approval of Zallafgovernance bodies, it is planned to issue an Invitation to Tender inAugust 2018.

 

2-Well Design

 

 

HOLE SIZE

FROM (ft)

TO (ft) MD

26 ”

0

±200

17-1/2”

±200ft

±2,500

12-1/4”

±2,500

±7,500

8-1/2”

±7,500

±10,000

CASING SIZE

FROM (ft)

TO (ft) MD

20”

0

±200

13-3/8”

0

±2,500

9-5/8”

0

±7,500

7” Liner

±7,300

±10,000

 

 

2-1Well Specifications:

  • Well Total Measured Depth: +/- 10,000 ft MD
  • Drilling & WO fluids: water, mud & oil
  • Mud weight: up to 11.5 ppg
  • Working Pressure: up to 5,000 psi
  • Drilling string: 5” DP 19.5 lb/ft G105 (12,000 ft), 5” HWDP 50 lb/ft (60 joints), 8” DC (20 joints), 6 ½” DC (28 joints), 4 ¾” DC (18 joints)

3 ½” DP 13.3 Ib/ft G105 (6,000 ft), 3 ½” HWDP 25 Ib/ft (30 joints), Stabilizers, Shock subs, Jars & X/O subs.

 

 

3- Main Components

   

   To perform works on PERMIT AREA as described above, the drilling unit shall have (as a minimum requirement) the following specifications:

  • Onshore Land Drilling  Rig with fast moving system
  • Draw- works HP Rating: 1,500 hp
  • SCR rig generator AC power system
  • Max hook load: 700 klb (10 lines)
  • Substructure: Max load 700 kIb + Setback rated load 450 kIb
  • Racking capacity: 12,400 ft 5’’ DP
  • Height: To accommodate 90 ft Stand
  • Rotary Table Opening (API): 27 ½ ”
  • Swivel: working pressure 5,000 psi
  • Portable TDS fit for the above mentioned well design (Rating 500 Ton API, 1,200 HP, 5,000 psi rating pressure, Max rating speed 250 rpm, Continue torque rating 60,000 ft-lb @ 140 rpm, Max B/O torque 75,000 ft-lb, with casing running tool service).
  • Two Mud Pumps type Triplex 1,500 hp, 2,000 gpm, working pressure 5,000 psi
  • Mud Tanks storage capacity:1,500 bbl active tanks equipped with 3 shakers,1,000 bbl reserve mud and 1,000 bbl reserve tanks
  • Stand pipe & choke manifold pressure rating: 5,000 psi
  • Well control equipment rating: 5,000 psi (Annular Preventer 3,000 psi)

 

 

4-Ancillary Equipment

 Ÿ50-ton crane and operator with 24-hour operator coverage

 Ÿ15-ton forklift with 24-hour operator coverage

 ŸBulldozer with 24-hour operator coverage

 ŸOilfield bed truck and trailer assigned to rig

 ŸComplete fishing tools for Contractor´s downhole tools

 ŸCrew pickup

 ŸToolpusher pickup

 ŸTelecommunication system for Contractor utilization

 

 

5-Selected Drilling Rig Information

   ŸRig Number

ŸAge of Drilling Rig

ŸOrigin of Drilling Rig

ŸAge of Camp

ŸOrigin of Camp

ŸDate of last Rig Inspection

ŸDate of last Tubular Inspection

ŸRig specific Accident record for previous 36 months

ŸLast three Operators and duration of contract, including area of work

ŸList of Senior and Junior personnel

ŸContractor training matrix for Rig Personnel

ŸValid Rig Certification

 

 

6-Prequalification Requirements

 

Zallaf_invites all interested local and international Drilling & Workover Contractors dully registered in Libya, in addition to the information requested above, to submit the complete prequalification document package, for registration and evaluation, as described here below.

 

6.1- Contractor profile with full details of similar Contracts performed with reference list of Clients giving names and addresses, as well as performed work description, location, start and completion dates, and value of Contracts.

 

6.2- Contractor financial and legal information, services scope, and organization chart

ŸAudited Finical Statement for the last (3) three years

ŸCopy of valid Contractor Commercial Registration in Libya

  • Copy of valid Contractor Business License
  • Copy of valid Contractor Registration at the Libyan Chamber of Commerce
  • Copy of valid Contractor Tax Certificate

ŸContractor Services Catalogue 

ŸContractor Organization Chart

 

 

 

6.3- Demonstrate Health, Safety, Security and Environment (HSSE) commitment

  • Contractor HSSE Policy
  • HSSE statistics for the last (3) years
  • Health, Safety, Security and Environment Management System(s)

 

6.4-Contractors interested in this prequalification request must satisfy the requirements stated above and submit the required information.

 

 

7- The Prequalification Request is not an Invitation to Tender

 

7.1- Only eligible Contractors that meet the prequalification criteria, which shall be determined by Zallaf sole discretion, will be included in the bidders list.

 

7.2- This prequalification request implies neither commitment nor obligation, implied orotherwise, forZallafto issue a tender or enter into a contract.

 

7.3- Zallafwill not be held responsible for any cost incurred for preparation and submission presented in response to this prequalification request.

 

7.4-Zallafhas the right, at its entire discretion and judgment, to exclude any file that does not abide by above stipulated requirements.

 

7.5- Interested Contractors shall submit their response including the details and references stated above, preferably via the online application https://zallaf.com/tenders/or, by e-mail or, alternatively, in writing not later than 15 (fifteen) days from the date of this publication. The envelope or e-mail shall be titled with “Provision of Drilling Rig Services - Block NC200 – 2018 Pre-Qualification Invitation” and shall be addressed to:

 

 

Zallaf Exploration and Production Oil & Gas Company

Dat El-Imad Complex

Tower 3, Floor 9

P.O Box 91151, Tripoli - Libya

Tel: +218 (0)21 33500 71

Attention: Sara Geblawi – Contracts Department

E mail address: عنوان البريد الإلكتروني هذا محمي من روبوتات السبام. يجب عليك تفعيل الجافاسكربت لرؤيته.

 

The prequalification documents shall indicate clearly the name of the Contractor, address, phone number, person to contact, an email address, and state interest to pre-qualify as a potential bidder.

 

8- Important Notes

 

8.1- This Prequalification Request is not an Invitation to Tender.

 

8.2-The ITT will only be issued to Contractors that have been prequalified.

 

8.3-Zallafwill exclusively do business with the actual Contractors performing the requested drilling rig services and not.

 

17 July 2018