الشركة الوطنية لحفر وصيانة آبار النفط ... شراء قطع غيار ومحركات و موالدات

 

تعلن لجنة العطاءات بالشركة الوطنية لحفر و صيانة آبار النفط عن رغبتها في شراء قطع غيار ومحركات ومولدات  كالتالي :

 

1-- Caterpillar Parts

Item

Qty

UOI

PartName

PartNo

ReplPN

AppMdl

1.

80

NO

PIN, COTTER, 1/8" X 2"

3B4621

 

D379

2.

8

NO

SPRING

4B4910

   

3.

100

NO

RING-SEAL O

5B3718

   

4.

8

NO

VALVE ASSEMBLY

7E5346

1P2298

D3306 ENG

5.

60

NO

BUSHING

8F6058

 

D3412 FUEL TRANSFER PUMP

6.

17

NO

PLUG, PIPE 1/8"

9F2247

0F9537, 3D8309, 7F8361, 3K6222

 

7.

2

NO

MOTOR, AIR STARTER

3H3171

 

D399

8.

10

NO

BEARING (SKF 6208) - CLUTCH & STARTER PINION

6H3957

1B4110, 9F3270

D8K

9.

7

NO

GAUGE, FEELER

8H8581

 

CAT WORKSHOP TOOLS

10.

18

NO

VALVE

4L7108

 

D398

11.

10

NO

GASKET

4L8132

 

D399

12.

24

NO

SEAL

5L2727

 

D3408, 3412

13.

24

ST

BELT SET  ( 4-PC/ST)

5L7426

7L7882; B-108

D399

14.

8

NO

CORE  ASSY.-RADIATOR

6L2344

 

CATERPILLAR D399 ENGINE - RADIATOR AND BLOWER FAN ASSY PN. 3N3239; RADIATOR AND SUCTION FAN ASSY PN. 3N3240

15.

34

NO

RING

6L2960

 

D399, 379

16.

149

NO

FILTER, AIR

6L4714

P103688

D399

17.

3

NO

ADAPTER

7L5420

 

D398

18.

23

NO

COVER

8L4857

 

D399

19.

9

AS

HOSE ASSY. END

9L5158

 

D3408

20.

5

AS

CARTRIDGE ASSY. TURBO

9L6239

 

D3408

21.

12

NO

GEAR

4N1119

 

D3412 FUEL TRANSFER PUMP

22.

12

NO

BEARING

4N7357

4N9248

D3408

23.

8

NO

BOOTS - RUBBER COUPLING

5N3272

 

D399

24.

14

GR

SHUT - OFF,  VALVE GROUP

5N3392

8L5299

D379, 398, 399

25.

8

NO

PICK-UP-TACHOMETER MAGNETIC

5N8757

 

D3306, 3406, D379 GEN SET

26.

4

NO

ADAPTER

6N0008

   

27.

8

AS

CARTRIDGE ASSY.

6N3276

 

D3412, D3408

28.

9

AS

PINION ASSY.

6N4165

 

D3408 FUEL INJ. PUMP

29.

3

NO

CYLINDER

6N7537

 

D379

30.

4

NO

GASKET

6N9133

 

D3408

31.

1

GR

CAMSHAFT GROUP

8N9244

   

32.

1

GR

PULLER GROUP-LINER

5P8665

   

33.

18

KT

GASKET KIT, CYLINDER SINGLE

5P8768

 

D3306

34.

40

NO

GASKET

1S4810

 

D399

35.

40

NO

GASKET

1S6595

 

D399, 3408

36.

1

NO

COVER (EXPANSION TANK)

7S9327

 

D398

37.

8

NO

BOLT- Ø 5/8" NF X 8"

8S4753

   

38.

11

KT

GASKET KIT, OIL COOLER

6V0234

 

D3408 TRUCK ENG

39.

5

KT

GASKET KIT-REAR STRUCTURE

6V2983

 

D3306

40.

4

NO

PIPE, REGULATOR HOUSING

1W6810

 

CAT D3400 SERIES

41.

9

NO

INDICATOR

4W0506

3N4414

D379, D398

42.

59

NO

SEAL

9Y9895

5S6296

 

43.

6

NO

ELBOW

32143

   

44.

1

NO

CAP- HYDRAULIC TANK

538985

V-130 FORKLIFT

45.

37

NO

VALVE, INTAKE

1007860

2W2620; 7N0572; 2704360

D3306

46.

3

NO

COVER ASSY.

1665971

C-18

47.

3

AS

PUMP ASSY., WATER

1727767

2W8001

D3306, 3304 ENG

48.

60

NO

SILICONE COMPOUND

1861528

5N5561

VAR. MODELS

49.

3

NO

GASKET

2245124

C-18

50.

2

NO

SEAL, CYLINDER PISTON

697448

 

V130 FORKLIFT

     

NOTHING FOLLOWS

     
 

 

2 -- Drawworks Parts

Item

Qty

UOI

Description

Part No

Application Model

1

1

EA

SHAFT, DRUM

06-039-096'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

3

2

EA

KEY

45-124-702'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

4

2

EA

FLANGE, BRAKE

06-039-247'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

4

1

EA

FLANGE, BRAKE

06-039-247'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

9

2

EA

BEARING, SPHERICAL ROLLER

65-670-586'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

11

4

EA

GASKET

45-149-194'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

12

2

EA

HUB-DRUM SHAFT

06-039-103'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

13

4

EA

KEY, DRUM SHAFT

45-802-114'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

14

1

EA

HI-CLUTCH SPROCKET, 36T, TRIPLE

06-039-106'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

16

2

EA

RETAINER, BEARING

06-039-110'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

19

1

EA

RETAINER HUB- LOW DRIVE

06-039-117'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

20

1

EA

SPROCKET, LOW CLUTCH-SPIDER-DRUM SHAFT

06-039-109'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

22

2

EA

DRUM CLUTCH, 32"OD X 11"WIDTH

06-039-114'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

23

2

EA

CARRIER, CLUTCH

06-039-113'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

25

2

EA

AIRFLEX-CLUTCH 32"

06-001-695'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

26

1

EA

RING, COUPLING CENTER

06-038-186'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

27

2

EA

ROTOR SEAL

06-001-857'''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

30

1

EA

SHAFT

06-039-022'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

33

1

EA

SPROCKET (26TX2)

06-039-065'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

34

4

EA

CONE, BEARING

65-011-548''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

35

4

EA

CUP, BEARING

65-013-545''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

36

1

EA

SPACER

06-039-048'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

38

2

EA

CARRIER BEARING

06-039-084''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

41

2

EA

SPACER

06-038-047'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

45

1

EA

BEARING

65-670-577'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

46

2

EA

KEY

45-122-916'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

47

2

EA

GEAR,REVERSE(85t)

06-039-064'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

48

1

EA

SPROCKET, OIL PUMP -50T 1/2"P-1

06-039-026'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

50

1

EA

HOUSING BEARING

06-039-037

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

52

1

EA

BEARING,ROLLER

65-670-579''''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

53

1

EA

SPACER

06-039-024''''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

54

1

EA

RETAINER BEARING

06-039-029''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

55

1

EA

KEY, INPUT SHAFT

45-122-912'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

56

1

EA

DRUM,NEUTRAL BRAKE

06-038-067'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

57

1

EA

PLATE RETAINER

06-009-690''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

58

1

EA

PLATE RETAINER

06-038-050

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

59

1

EA

SPACER

06-039-034'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

60

1

EA

SHAFT,OUTPUT

06-039-025'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

61

1

EA

RING CLAMPING

06-038-351

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

62

2

EA

BEARING CUP

65-013-572'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

63

2

EA

BEARING CONE

65-011-215'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

64

1

EA

HUB SPROCKET

06-039-023'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

65

1

EA

SPACER

06-039-035'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

66

1

EA

CARRIER BEARING

06-038-083'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

67

1

EA

SHIM SET

06-015-128'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

68

1

EA

SPACER

06-039-036'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

69

1

EA

SPROCKET (22T DOUBLE)

06-039-058'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

70

2

EA

SPACER

06-039-024'''''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

71

1

EA

HOUSING BEARING

06-039-037'''''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

72

1

EA

SHIM SET

45-192-000'''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

73

2

EA

GASKET

45-149-162'''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

74

1

EA

BEARING,ROLLER

65-670-579'''''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

75

1

EA

RETAINER, CARRIER

06-039-029'''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

76

2

EA

KEY(1-1/4"X 1-1/4' X 7-1/2"lg

45-122-913'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

77

1

EA

HUB,CLUTCH

06-039-165'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

78

1

EA

RETAINER PLATE

06-038-050''''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

79

1

EA

CLUTCH, SPLINE

06-039-063'''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

80

1

EA

SPACER

06-039-049'''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

81

1

EA

SPROCKET

06-039-127'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

82

2

EA

BEARING CONE

65-011-548'''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

83

2

EA

BEARING CUP

65-013-545'''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

84

1

EA

SHIM SET

45-190-250'''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

85

1

EA

CARRIER, BEARING

06-039-084'''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

87

1

EA

HOUSING, BEARING

06-039-047'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

88

1

EA

BEARING

65-670-581'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

90

2

EA

GASKET

45-149-136'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

91

1

EA

SPACER

06-039-028'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

93

2

EA

KEY

45-122-417'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

96

1

EA

GEAR(101T)

06-038-061'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

98

1

EA

CLUTCH SPLINE

06-038-084''

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

99

1

EA

YOKE CLUTCH

06-038-151'

PARTS FOR OILWELL DRAWWORKS MDL. M760 - RIG-8

 

 

3 -- Caterpillar D3508 Generator

Item

Req. Qty.

UOI

Description

 

 

 

CATERPILLAR D3508 GENERATORS

 

 

 

 

1.

2

SETs

CATERPILLAR GENERATOR SET 3508TA

 

 

 

POWER RATING : 550 ekw

 

 

 

POWER RATING @ 0.8 p.f. : 688KVA PRIME POWER

 

 

 

VOLTAGE OUTPUT: 480Vac

 

 

 

PHASE : 3Phase

 

 

 

FREQUENCY / RPM : 60Hz, 1200RPM

 

 

 

COMPOSED WITH THE FFG.

 

 

A.

FOR ENGINES

 

 

 

a) Air Inlet System

 

 

 

     * Dual Element and Heavy Duty Air Cleaners with

 

 

 

        Service Indicators ;

 

 

 

     *With Manual shutoff system

 

 

 

b) Cooling system

 

 

 

     *Aftercooler

 

 

 

     *Radiator and fan for Desert Operation with

 

 

 

       ambient temperature 140°F

 

 

 

     * Radiator with guard

 

 

 

     * Coolant Drain line with valve

 

 

 

     * Fan and belts guards

 

 

 

     * Jacket Water Pump

 

 

 

c) Exhaust System

 

 

 

     * Dry exhaust manifold

 

 

 

     * Flanged faced outlets

 

 

 

     * Mufflers(15dba)

 

 

 

     * Stainless steel exhaust flex fittings

 

 

 

     * Elbows, flanges, expanders and Y adapters

 

 

 

     * Spark Arrestors

 

 

 

d) Fuel System With Manual Shutoff

 

 

 

      * Secondary Fuel Filters

 

 

 

      * Fuel Priming and Transfer  Pump

 

 

 

      * Flexible fuel Lines

 

 

 

      * Fuel cooler

 

 

 

      * Water Separator

 

 

 

      * Duplex Fuel filter

 

 

 

e) Lube System

 

 

 

       * Lubricating oil and Filter

 

 

 

       * Oil drain Line with valves

 

 

 

       * Fumes Disposal

 

 

 

       * Gear type lube oil pump

 

 

 

       * Duplex oil Filter

 

 

 

       * Deep Sum oil Pan

 

 

 

       * Crankcase breather

 

 

 

       * Oil Cooler

 

 

 

       * Oil filler dipstick

 

 

 

       * Crankcase explosion proof cover

 

 

 

       * Centrifugal Oil Cleaner

 

 

 

f) Governor

 

 

 

       * Woodward 2301A speed control W/ EG6PC

 

 

 

          actuator RH

 

 

 

g) Starting/Charging

 

 

 

        * 24Vdc heavy duty starting motor

 

 

 

        * Barring device(manual)

 

 

 

        * Belt driven 45Amps charging alternator

 

 

 

        * Batteries with rack and cables

 

 

 

        * Battery disconnect switch

 

 

 

h) Instrument Panel

 

 

 

* Instrument Panel should be premium type with :

 

 

 

     * Dual Tachometer Drive and service Meters  with gauge

 

 

 

     * Oil Pressure Gauge

 

 

 

     * Water Temperature Gauge

 

 

 

     * Fuel Pressure Gauge

 

 

 

     * Exhaust Temperature (Pyrometer)

 

 

 

     * Ampere Meter Gauge

 

 

B.

FOR GENERATOR

 

 

 

* SR4B with VR6 Voltage Regulator

 

 

 

* Permanent Magnet excitation

 

 

 

* 6 Poles

 

 

 

* Class H insulation

 

 

 

* Class F temperature(105°C prime)

 

 

 

* Reactive droop

 

 

 

* Digital Voltage Regulator, 3hase sensing

 

 

 

* Bus bar connections

 

 

 

* Winding Temperature Detector

 

 

 

* Bearing Temperature Detectors

 

 

 

* Anti-condensate space heaters

 

 

 

* Space heater relay

 

 

 

* Cable access box

 

 

 

* Main Circuit Breaker UL Listed 3P w/ shunt Trip (low and medium voltage)

 

 

C.

* ELECTRONIC MODULAR CONTROL PANEL(EMCP II+) with the ffg.features

 

 

 

               * 24Vdc CONTROL

 

 

 

               * Electrically dead front

 

 

 

               * Lockable hinge door

 

 

 

               * Generator terminal box mounted

 

 

 

               * Single location for customer connection

 

 

 

               * Panel Illuminating lights

 

 

 

               *True RMS Metering , 3phase

 

 

 

a)Digital Indication (LCD)

 

 

 

         - AC voltage -3phase (L-L & L-N)

 

 

 

          - AC Amps (3phase & total)

 

 

 

           - KW (total & per phase)

 

 

 

           - k.VA (total)

 

 

 

           - kV-AR (total)

 

 

 

            - kWhr (total)

 

 

 

            - PF(Average total & per phase)

 

 

 

            - % of rated (total)

 

 

 

            - frequency

 

 

 

            - DC Voltage

 

 

 

             - Coolant temperature

 

 

 

             - Oil pressure

 

 

 

             - RPM

 

 

 

              - Hours run

 

 

 

              - System diagnostics

 

 

 

b)Controls

 

 

 

               - Auto Start/Stop

 

 

 

                - Emergency Stop

 

 

 

                - Lamp Test

 

 

 

                - Cycle Crank

 

 

 

                - Voltage control

 

 

 

                 - Cooldown timer

 

 

 

                 - Phase selector switch

 

 

 

                 - Load demand relay

 

 

 

                 - Spare relay -programmable

 

 

 

                 - Isochronous speed control

 

 

 

                  - Load share(shipped loose)

 

 

 

c)Enclosure

 

 

 

                    NEMA 1 , IP22, Vandall door

 

 

 

d) Indicating lights

 

 

 

                   - Low oil pressure

 

 

 

                   - Oil temperature

 

 

 

                   - High coolant temperature

 

 

 

                   - Overspeed

 

 

 

                   - Overcrank

 

 

 

                    - Emergency Stop

 

 

 

                     - Fault Shutdown

 

 

 

                     - Fault Alarms

 

 

 

                     - 3spare lights/4 spare inputs

 

 

 

e) Protective relaying(Programmable relays)

 

 

 

                       - Over/Under Voltage

 

 

 

                       - Reverse Power relay

 

 

 

                       - Over/Under frequency

 

 

D.

MOUNTING

 

 

 

* GENSET TO BE ON OILFIELD SKID PROVIDED WITH

 

 

 

    TOWING  POINTS

 

 

 

*  Engine with radiator & Generator (GENSET) SHOULD

 

 

 

   BE  MOUNTED IN ONE SKID.

 

 

 

 * Skid Base should be with dragging points

 

 

E.

GENERAL

 

 

 

* Paint - Caterpillar Yellow except rails and radiators

 

 

 

    gloss black

 

 

 

*SAE standard rotation

 

 

 

*Flywheel and Flywheel housing -SAE No.00

 

 

 

NOTE:

 

 

 

* PLEASE REQUIRE ARRANGEMENT NUMBER

 

 

 

* GENSETS TO BE USED FOR LAND DRILLING RIGS

 

 

 

* MACHINE SHOULD BE BRAND NEW AND UNUSED

 

 

 

* MUST BE MANUFACTURED FROM USA

 

 

 

*COMPLETE WITH TEST CERTIFICATE

 

 

 

*WITH CERTIFICATE OF CONFORMANCE

 

4

SETS

*SERVICE & TROUBLESHOOTING MANUAL AND PARTS MANUAL   WITH CD ROM

 

 

 

NOTHING FOLLOWS

 

 

4 -- CAT 3508 Engine With T-Converter

Item

Req. Qty.

UOI

Description

     

CAT 3508 ENGINE with T/CONVERTER

       

1.

4

UNITs

CAT D3508 RIG ENGINE: Direct coupled with C245-125 FH

     

NATIONAL TORQUE CONVERTER

   

A.

ENGINE:

     

Make / Model                       : Cat D3508

     

Cooling System                    : Water Cooled / Radiator

     

Speed                                   : 1,200 rpm

     

Power                                  : 680 HP @ 1,200 RPM

     

Fuel Used                              : Diesel

     

No. of Cyinders                     : V 8

     

Cycle                                     : 4 Stroke cycle IC engine

     

Aspiration                             : TCAC Jacket water

     

Compression Ratio                : 14. 5 is to 1

     

Bore                                      : 170.00 mm (6. 69")

     

Stroke                                    : 190.00 mm (7. 48")

     

Application                            : Rig Floor Engine

       
     

FEATURES:

     

1. Air Inlet System: Heavy duty Air cleaners, dual element,

     

service indicators, Air inlet adaptors & shut off.

     

2. Cooling System: Radiator with guard for desert operation

     

@ 50°C ambient temperature capability with expansion

     

tank, coolant drain lines with valves, fan belt & guards,

     

coolant level sensors & coolant level switch guage. Should

     

be shipped with Cat extended life coolant. Fan should be

     

blower type. Inform supplier to make sure that we receive

     

the right size of Radiator intended for Rig Engine D3508

     

applicationthat would fit in the Rig floor without any problem.

     

3. Exhaust System:Stainless steel exhaust flex fittings, dry

     

manifold, flanges face outlet & mufflers with spark arrestor.

     

4. Fuel system: Primary & secondary fuel filters, with service

     

indicators, fuel priming pump, flexible fuel lines.

     

5. Lube System: Lubrication Ol filters, oil level regulator, oil

     

lines with valves, fumes disposal with lines, gear type lube

     

oil pump, electronic & air pre-lube oil pump, deep oil sump.

     

6.Mounting System: Rail mounted floor type. Length to acco-

     

modate from radiator to Torque converter. Engine & radiator

     

must be mounted in one skid.

     

7. Starting System: 24 Volts Starting motor, 45 amperes

     

Charging alternator, batteries with racks & cable, disconnect

     

switch &  barring device. Flywheel & flywheel housing

     

SAE 00 to fit with C245-125 FH National Torque Converter.

     

8. Governing System: Hydra Mechanical Governor  3161L

     

9. Shut off system: Engine should have Hydra Mechanical Shut

     

OFF Protection for LOW Oil Pressure, Low water level,

     

High Water temperature, OVER CRANK & Overspeed

     

Engine RPM can be controlled from Driller's Console.

     

10.  With lifting eyes

     

11. Instrument panel should be right hand mounted

     

12. Filters should be cartridge type

     

13. Air Actuated Governor Control

     

AIR ACTUATOR

     

ROD END - BALL BEARING

     

KIT - ACTUATOR (Includes lever, cover,

     

bearing, push rod, diaphragm)

     

KIT - DIAPHRAGM (Include brng. & diaphragm)

       
   

B

TORQUE CONVERTER

     

1 Brand                           : NATIONAL

     

2. Model                          : C245 - 125 FH

     

3. Include Shock mounted oil temperatrure & pressure gauge,

     

with circulating pump, cooling connections, heavy output

     

shaft & bearings, with the following arrangement type:

     

- Arrangement for direct mounting on SAE # 00 Engine

     

flywheel housing complete with spline drive & support

     

plates & heat exchanger with cooling system.

       
   

C

General:

     

- Include  other optional features for our selection

     

- Engine RPM and Emergency Shutoff can be controlled from driller console

     

- Each engine assembly should have a separate Oilfield skid with

     

Rubber mounting capable of towing & skidding as it should

     

be used on Mobile Rigs.

     

- The engine should be permanently mounted on the skid

     

& does not require to be removed from skid during every

     

Rig move.

     

- The unit should exactly replace the existing Cat D379 engine

     

complete with Torque Converter.

     

- The engine should be Brand new & of USA origin

     

- The new Cat D3508 with Torque Converter should be

     

applicable to be used for Oil well 1600 Compound Drive

     

Serial No. H37 -26 or H 37 -28

     

-  Include Test Certificate, Certificate of conformance, Warranty

     

Certficate & any other needed documentations

     

-  Complete with Service & user Manual with CD ROM - 7sets

     

NOTHING FOLLOWS

 

 

5 -- CAT 3512B Caterpillar Generator

Item

Req. Qty.

UOI

Description

     

CAT 3512 CATERPILLAR GENERATOR

       

1.

4

SETs

CATERPILLAR GENERATOR SET 3512 LAND DRILLING GENERATORS, DIESEL OILFIELD GENERATOR SET, OPEN TYPE(NOTE: PLS. NEW ENGINE MADE IN USA)

     

Power Rating: 1045 ekw

     

Power Rating @ 0.8 pf / 1492KVA

     

Voltage Output: 600Vac

     

Phase: 3 Ø (phase)

     

Frequency / RPM : 60Hz / 1200 RPM

     

GENERATOR SET COMPOSED OF THE FOLLOWING:

   

A.

FOR ENGINES

     

a). Air Inlet system

     

*Corrosion-resistatnt aftercooler core

     

*Air inlet shutoff

     

*Dual element & heavy duty air cleaners with

     

*Remote air inlet adapter-rectangular & round

     

* With manual shutoff System

     

b). Cooling system

     

*Separate-circuit aftercooled

     

*Outlet controlled jacket water thermostat

     

*Jacket water pump – gear driven

     

*Dual outlet

     

*Aftercooler water pump – gear driven

     

*Aftercooler water thermostat

     

* Radiator & fan for desert operation with

     

ambient temperature to 140 deg F /50◦C

     

* Radiator with guard

     

* Coolant drain lines with valve and level sigth gauge

     

* Fan & belts guards

     

* Jacket Water pump

     

*Coolant level sensor

     

*Coolant conditioner

     

c). Exhaust system

     

* Dry exhaust manifold

     

* Flanged faced outlets

     

* Dual turbochargers, water cooled bearings

     

* Stainless steel exhaust flex fittings

     

* Elbows, flanges, expanders & Y adapters

     

* Elbow, 305 mm (12 in)

     

* Muffler, 356 mm (14 in), spark arresting, includes companion

     

* flanges, clean-out box, and spark box

     

* Muffler, 305 mm (12 in), spark arresting, includes companion

     

* flanges, clean-out box, and spark box

     

* Spark arrestors

     

d). Fuel System

     

* Fuel transfer pump

     

* Fuel return line with flexible connection

     

* Electronic unit injectors

     

* Primary fuel filter

     

* Primary fuel filter with water separator

     

* With manual Shut off for fuel

     

* Fuel Pressure Gauge

     

e). Lube System

     

* Crankcase breather

     

* Oil cooler

     

* Shallow oil pan

     

* Oil drain extension, 2 in NPT female connection

     

* Crankcase fumes disposal

     

* Oil level regulator

     

* Centrifugal Oil Cleaner

     

* Oil filler

     

* Gear type lube oil pump

     

f). Governing

     

* CATERPILLAR ADEM control system

     

* Load sharing governor, 2301A

     

g). Starting / Charging

     

* 24Vdc Heavy Duty Starting Motor

     

* Belt Driven 68 Amps Charging alternator

     

* Energized to run  (ETR) fuel Shut off solenoid

     

* Batteries with Rack & cables

     

* Battery Disconnect Switch

     

* Energized to run  (ETR) fuel Shut off solenoid

     

h). Instrument Panel

     

* Emergency stop button

     

* Analog gauges:

     

* Fuel pressure

     

*  Engine oil pressure

     

*  Engine oil temperature

     

*  Engine coolant temperature

     

*  DC voltage

     

* Engine percent load

     

* EMCP 4.3 control panel

     

*  5.5 inch graphical display

     

* 16 languages supported

     

*  Engine/generator monitoring and protection

     

*  CAN, RS 485 MODBUS, Ethernet communications supported

     

*  Remote e-stop/start/stop

     

*  Engine start and crank attempt counter

   

B.

FOR GENERATOR (600Vac, 60Hz, 1045 eKW)

     

* SR4B with VR6 Voltage Regulator

     

* SE Excitation

     

* 6 Poles

     

* Class H Insulation RISE (127°C)

     

* Reactive Droop

     

* Digital Voltage Regulator, 3 phase Sensing

     

* Bus bar Connections.

     

* Anti Condensate Space Heaters

     

* Cable Access Box

     

* Main Circuit Beaker UL Listed 3P with Shunt Trip

   

C.

ELECTRIC MODULAR CONTROL PANEL  (EMCP 4.3)

     

WITH THE FOLOWING FEATURES:

     

a). 140 mm (5.5 in) Graphical Display

     

• Generator AC voltage

     

• 3-phase (L-L & L-N)

     

• ± 0.25% accuracy

     

• rpm and battery voltage

     

• Generator AC current (per phase and average)

     

• Generator frequency

     

• Power metering (kW, kVA, kVAr, pf)

     

• Hour meters (kW-hour, kVAr-hour)

     

• Engine oil pressure (psi, kPa or bar)

     

• Engine oil temperature (°C or °F)

     

• Engine coolant temperature (°C or °F)

     

• Multiple language support

     

b). Engine start and crank attempt counter

     

• Real time clock

     

c). Communication

     

• Accessory CAN data link

     

• RS-485 annunciator data link

     

• RS-485 SCADA (Modbus RTU)

     

• Ethernet SCADA (Modbus TCP)

     

Controls

     

• Auto/start/stop

     

d). Engine cooldown timer

     

• Emergency stop

     

• Engine cycle crank

     

• Programmable cycle timer

     

e). Generator Set Protection

     

• Over/under voltage

     

• Over/under frequency

     

• Generator phase sequence

   

E.

f).  Over current (timed and inverse)

     

• Reverse kW, kVA

     

• Current balance

     

• Low oil pressure

     

• High coolant temp

     

g).  Low coolant level

     

• Fail to start

     

• Overspeed

     

Outputs

     

• 16 programmable digital outputs

     

• 3 programmable (4-20mA or ±10V)

     

h).  programmable (PWM)

     

Inputs

     

i).  Emergency stop

     

• Remote start

     

• 12 programmable digital inputs

     

• Oil pressure and water temperature

     

• 3 programmable inputs (±10V, PWM, current,

     

or resistive)

     

• Oil temperature, fuel level

   

D.

MOUNTING

     

* GENSET TO BE ON OILFILED SKID PROVIDED WITH

     

TOWING POINTS & FORKLIFT POCKETS

     

* SKID BASE WITH DRAGGING POINTS

     

GENERAL DETAILS

     

* Paint - Caterpillar Yellow except rails & radiators

     

should be gloss black.

     

* SAE Standard Rotation

     

* Flywheel & Flywheel Housing - SAE No. 00

     

NOTE:  *Gensets to be used for Ross Hill SCR Drilling Rig AS REPLACEMENT TO D399 GENSET

     

* Machine should be Brand New & unused

     

* Must be genuine & manufactured in USA

     

* Complete with Test Certificate, Certificate of

     

Conformance, & other standard related documents

     

* Service Parts Manual should be included with CD ROM - 4sets

     

NOTHING FOLLOWS

 

Terms & Conditions:

BID CLOSING DATE:   3Weeks.

CIF Tripoli, by Sea Port or by Courier (if can be accommodated) - complete with Insurance.

Delivery Time: Including Transit Period to Tripoli.

Validity of Offer:  30 to 60 days.
Name of Manufacturer & Country of Origin: Required.

Terms of Payment: Negotiable.

Total Order Value: Including all ancillary charges i.e, insurance, legalization of documents, courier fee for original invoice documentations required when making request for payment and for the legalization, packing, documentations etc.).

In case of alternative offer other than we required, it is necessary to provide as detailed specs and catalogs for easy evaluation.

An NWD Technical Team ( 2 Engineers, ) will be send to witness the TEST run of the Rig Engines and Generators.
Offer must be submitted in two (2) sealed envelopeswith red paraffin wax: one (1) Technical Offer & one (1) Commercial Offer properly labeled with complete description for the Attention of:

 Swani Road Km. 13 El Krimiyah

  P.O. Box 1106

Tripoli, Libya

 Tel No. 00218 21 5670701 to 05.

Regards,

لجنة العطـاءات

بالشركة الوطنية لحفر وصيانة أبار النفط