شركة الخليج العربي للنفط : إعلان عن وظائف شاغرة ..

تعلن دارة الشؤون الفنية بشركة الخليج العربي للنفط

عن حاجتها إلي موظفين من ذوي الخبرة في مجال

الفحص الفني و الحماية من التآكل

و ذلك لشغل الوظائف الاتية :

( فني تآكل اول , اخصائي تآكل ثالث )

وعلي من تنطبق علية الشروط المرفقة إرسال السيرة الذاتية علي هذا العنوان :

    عنوان البريد الإلكتروني هذا محمي من روبوتات السبام. يجب عليك تفعيل الجافاسكربت لرؤيته.

 

و سيتم إلاتصال هاتفياً بمن تنطبق عليه الشروط و ذلك  لاجراء المقابلة الشخصية

علماً بانه لن تقبل الطلبات بعد الموعد المحدد

اخر موعد لقبول الطلبات 31/03/2017م

شروط عامة

1-  ليبي الجنسية

2-  العمر بين 25 الى 45 سنة

3-  ان يكون متحصل على مؤهل جامعي معتمد

4-  على ان تنطبق عليهم الشروط المرفقة وان يجتاز المقابلة الشخصية

5-  العمل فى اي موقع من مواقع الشركة

 

الاوراق المطلوبة

. السيرة الذاتية

. صورة من المستوى العلمي

. صور من الشهادات المتحصل عليها فى مجال العمل

 

(1)    Internal Corrosion

----------------------------------

A.    The following minimum qualifications are required (Technician)

 

1. The candidate can read, write and speak English

2. The candidate must have graduation in Chemistry or Chemical Engineering degree with at

least five years experience in analysis of various properties of the produced fluids such as:

· Produced water: pH, conductivity, density, major cations (Ca2+, Mg2+, Sr2+, Ba2+

Na+, K+), major anions (Cl-, SO4

2-, HCO3

-/CO3

2- , S2-), Fe2+, total iron, dissolved CO2,

dissolved H2S, oil content, etc.

· Crude oil: API, Specific gravity, total sulfur content, dissolved H2S content, pour point,

flash point, water and sediment content, etc.

· Associated gas: Composition of gas (Chromatographic method), H2S content.

3. The candidate must have knowledge and experience of sampling representative sample of

water, crude oil, gas, produced fluid emulsion for analysis.

4. The candidate must have knowledge and at least five years experience using oilfield

chemicals (corrosion inhibitors, scale inhibitors, biocides, and H2S scavengers) in oil and

gas production, storage and transportation facilities.

5. The candidate must have knowledge and experience of monitoring performance of corrosion

inhibitors using weight loss coupons, ER probes, and LPR probes.

6. The candidate must have knowledge of determination of the counts of sulfate reducing

bacteria (SRB) using standard techniques.

7. The candidate must have knowledge to present monitoring results in acceptable format

(tabular format, graphical formal) and to prepare an acceptable report.

8. The candidate has knowledge of safely handling oilfield chemicals.

9. Last but not the least the candidate must have pleasant personality and willingness to work

and learn new things.

[3]

(2) Cathodic Protection

General Condition

1. The candidate can read, write and speak English

2. The candidate should have knowledge of NACE, API, ASME, etc. related to application of

cathodic protection in buried pipeline, casing of wells, buried and submerged facilities

3. The candidate should have experience of presenting cathodic potential inspection data in an

acceptable report with sound and firm recommendations.

4. The candidate should have knowledge of safety in working offshore and onshore structures.

5. Last but not the least the candidate must have pleasant personality and willingness to work

with team and learn new things.

Special Condition

B. The following minimum qualifications are required (Technician)

1. The candidate must have graduate degree in Electrical Engineering or its equivalent

degree with at least five years experience in cathodic protection.

2. The candidate should have level I or II cathodic protection certificate.

C. The following minimum qualifications are required (Specialist)

1. The candidate must have graduate degree in Electrical Engineering or its equivalent degree

with at least (10) ten years experience in cathodic protection.

2. The candidate should have experience of preparing of scope of work for tank bottoms,

buried and submerged pipelines, and other buried or submerged structures.

[4]

3. The candidate should have level II or III cathodic protection certificate.

(3) Inspection and NDT

The following minimum qualifications are required (Specialist):

1. The candidate can read, write and speak English

2. The candidate must have graduate degree in Metallurgical Engineering or its equivalent

degree.

3. The candidate should have level II or III certification in NDT inspection.

4. The candidate should have at least ten years experience in NDT inspection (Radiography

testing, Ultrasonic testing, Liquid penetrant testing, Magnetic particle testing and visual

testing) for vessels in refineries, petrochemical plants and/or oil and gas production

facilities.

5. The candidate should have knowledge of NACE, API, ASME, etc. standards and standard

practices. The candidate should be able to prepare scope of work for inspection of tanks,

high and low pressure vessels, heat exchangers, boilers, pipelines, separators and other

vessels used in oil and gas production facilities.

6. The candidate should have experience of presenting inspection data in an acceptable report

with sound and firm recommendations.

7. The candidate should have knowledge of safely handling inspection equipment.

8. Last but not the least the candidate must have pleasant personality and willingness to work

with team and learn new things.